InFocus IN116x vs InFocus IN2126
Bold marks the better figure where both are stated to the same standard. “—” means the manufacturer doesn't state it.
| InFocus IN116x | InFocus IN2126 | |
|---|---|---|
| Display system | ||
| Imaging technology | DLP | DLP |
| Technology brand | — | DLP |
| Number of imaging devices | 1 | 1 |
| Chip / panel diagonal | 0.65 in | 0.65 in |
| Native aspect ratio | 16:10 | 16:10 |
| Native resolution | 1280 × 800 | 1280 × 800 |
| Colour wheel segments | 6 | 6 segments |
| Colour wheel speed | 2× | 2× |
| Optics | ||
| Throw ratio | 1.5–1.8:1 | 1.47–1.83:1 |
| Throw reference point | Lens | Lens |
| Projection distance table | 40″: 1.5–1.8 m · 60″: 2.2–2.6 m · 80″: 2.9–3.5 m · 100″: 3.7–4.4 m · 150″: 5.5–6.6 m | 45″: 1.4–1.8 m · 60″: 1.9–2.4 m · 80″: 2.5–3.2 m · 100″: 3.2–4 m · 150″: 4.8–6 m |
| Zoom type | Optical | Optical |
| Zoom ratio | 1.2× | 1.2× |
| Focus | Manual | Manual |
| Vertical lens shift | 0% | 0% |
| Horizontal lens shift | 0% | 0% |
| Fixed offset | 15% | 13% |
| Interchangeable lens | No | No |
| Vertical keystone | -40–40° | — |
| Light source | ||
| Light source type | Lamp | Lamp |
| Light source detail | 203W P-VIP bulb | 230 W UHP lamp (SP-LAMP-070) |
| Lamp wattage | 203 W | 230 W |
| Light source life | Normal: 5,000 h · Low power: 6,000 h · Eco blanking: 10,000 h | Normal: 3,500 h · Eco: 5,000 h |
| Warm-up time | — | 60 s |
| Cool-down time | 30 s | 60 s |
| Brightness | ||
| Claimed brightness (non-standard) | 3,200 | 3,200 |
| Claimed brightness unit | Unspecified | Unspecified |
| Brightness by mode | Normal: 3,200 lm · Low power: 2,900 lm | Normal: 3,200 lm · Eco: 2,500 lm |
| Contrast & black level | ||
| Dynamic contrast | 15,000:1 | 4,000:1 |
| Colour | ||
| Bit depth / 'number of colours' | 30 bit | 30 bit |
| Audio | ||
| Speaker power | 2 W | 2 W |
| Speaker count | 1 | 1 |
| Audio channels | Mono | Mono |
| Audio outputs | 3.5 mm | 3.5 mm |
| Inputs, control & connectivity | ||
| Max input signal | 1920 × 1200 | 1920 × 1200 |
| HDMI port count | 1 | 1 |
| HDMI ports (feature-level) | HDMI: HDMI 1.4 | HDMI: HDMI 1.4 |
| Audio input terminals | 3.5 mm | 3.5 mm |
| Horizontal scan frequency | 15–91 kHz | 31–100 kHz |
| Vertical scan frequency | 24–120 Hz | 50–120 Hz |
| VGA input | Yes | Yes |
| RS-232 | Yes | Yes |
| LAN control | — | Yes |
| Control ecosystem drivers | — | Crestron |
| Ethernet | — | Yes |
| 3D | ||
| 3D support | Yes | Yes |
| 3D sync method | DLP-Link | DLP-Link |
| 3D formats | Frame packing, Side-by-side, Top-bottom, Frame sequential | — |
| Glasses included | 0 | — |
| Setup automation | ||
| Auto keystone | Yes | — |
| Acoustic noise | ||
| Fan noise (sound pressure) | Normal: 32 dB(A) · Low power: 30 dB(A) | Normal: 30 dB(A) · Eco: 28 dB(A) |
| Environment & power | ||
| Operating temperature | — | 5–35°C |
| Altitude / high-altitude mode | 3,000 m | 3,068 m |
| High-altitude mode | Yes | Yes |
| Operating orientations | Table, Ceiling, Rear | Table, Ceiling, Rear |
| Rated voltage | 100–240 V | 100–240 V |
| Rated frequency | 50–60 Hz | 50–60 Hz |
| Power consumption by mode | — | Normal: 540 W · Eco: 440 W |
| Standby power | — | 15 W |
| Physical & installation | ||
| Width | 292 mm | 284 mm |
| Depth | 220 mm | 235 mm |
| Height | 121 mm | 70 mm |
| Weight | 2.45 kg | 2.17 kg |
| Exhaust / intake direction | — | Front |
| Air filter | None | None |
| Safety & compliance | ||
| Safety & market certifications | UL, FCC, CE, CCC, KC | UL, FCC, CE |
| Support & ownership | ||
| Warranty | 🇺🇸 US 1 yr | 🇺🇸 US 2 yr · 🇫🇮 FI 5 yr |
| Light-source warranty | 6 months | 6 months |
| Latest firmware | — | v1.43 |
| User manual | https://prosoundonline.com/wp-content/uploads/Infocus-IN119hdx-Manual.pdf | https://www.projectorcentral.com/pdf/projector_manual_6993.pdf |
| In the box | ||
| Box contents | Power cord, Vga cable, Safety instructions, User manual, Remote | Projector, Power cord, Vga cable, Safety instructions, User manual, Remote control |
| Remote type | IR | IR |
| 3D glasses in box | 0 | — |