Epson EpiqVision Flex CO-FH02 vs Hisense C3 Ultra Max
Bold marks the better figure where both are stated to the same standard. “—” means the manufacturer doesn't state it.
| Epson EpiqVision Flex CO-FH02 MSRP $499.99 |  Hisense C3 Ultra MaxMSRP $3,999.99 | |
|---|---|---|
| Display system | ||
| Imaging technology | 3LCD | DLP |
| Technology brand | 3LCD | DLP |
| Number of imaging devices | 3 | — |
| Chip / panel diagonal | — | 0.47 in |
| Native aspect ratio | 16:9 | — |
| Native resolution | 1920 × 1080 | — |
| Addressable resolution | — | 3840 × 2160 |
| Optics | ||
| Throw ratio | 1.19–1.61:1 | 0.85–1.7:1 |
| Projection distance table | 26″: 0.67–0.91 m · 34″: 0.89–1.2 m · 40″: 1.05–1.42 m · 60″: 1.58–2.14 m · 80″: 2.11–2.86 m · 100″: 2.64–3.58 m · 200″: 5.31–7.17 m · 290″: 7.71–10.41 m · 300″: 7.97–10.77 m · 391″: 10.4–14.04 m | 65″: 1.22–2.45 m · 100″: 1.88–3.76 m · 120″: 2.26–4.52 m · 150″: 2.82–5.65 m · 300″: 5.65–11.29 m |
| Zoom type | Digital | Optical |
| Zoom ratio | 1.35× | 2× |
| Focus | Manual | Auto |
| Vertical lens shift | — | ±120% |
| Horizontal lens shift | — | ±47% |
| Focal length | 16.4 mm | — |
| F-number | 1.44 | — |
| Image size range | 26–391 in | 65–300 in |
| Vertical keystone | -30–30° | — |
| Horizontal keystone | -30–30° | — |
| Corner / warp correction | 4pt | — |
| Light source | ||
| Light source type | Lamp | RGB triple laser |
| Light source detail | 188 W UHE (Ultra High Efficiency) lamp | Red + Green + Blue Trichrome Laser (Hisense 'LPU 3.0' RGB triple laser) |
| Lamp wattage | 188 W | — |
| Light source life | Normal: 6,000 h · Eco: 12,000 h | Rated: 25,000 h |
| Cool-down time | 0 s | — |
| Laser wavelengths | — | R 643 nm, G 530 nm, B 465 nm |
| Light-source dimming | Manual steps | — |
| Brightness | ||
| ISO light output | 3,000 lm | — |
| ANSI lumens | — | 5,000 lm |
| Colour light output (CLO) | 3,000 lm (colour) | — |
| Contrast & black level | ||
| Dynamic contrast | — | 5,000:1 |
| Manual iris / aperture | — | Yes |
| Colour | ||
| BT.2020 gamut | — | 118% |
| Gamut metric | — | Area |
| Filmmaker Mode | — | Yes |
| HDR | ||
| HDR formats | — | Dolby Vision, HDR10, HDR10+, HLG |
| Motion & gaming | ||
| Frame interpolation (MEMC) | — | Yes |
| Max refresh rate | — | 1920×1080: 240 Hz |
| Variable refresh rate | — | FreeSync |
| Auto low-latency mode | — | Yes |
| Audio | ||
| Speaker power | 5 W | 56 W |
| Speaker count | 1 | 5 |
| Audio channels | Mono | 2.1 |
| Audio partner | — | Devialet |
| DTS | — | Yes |
| Audio outputs | Bluetooth | 3.5 mm, Optical |
| HDMI ARC | — | Yes |
| HDMI eARC | — | Yes |
| Bluetooth speaker mode | Yes | — |
| Bluetooth audio out | Yes | — |
| Inputs, control & connectivity | ||
| Max input signal | 1920 × 1080 | — |
| HDMI port count | 1 | 2 |
| HDMI ports (feature-level) | HDMI: HDMI (CEC) | HDMI 1: HDMI 2.1, eARC (ALLM); HDMI 2: HDMI 2.1 (ALLM) |
| Control ecosystem drivers | Google Home | Alexa, Control4 |
| Wi-Fi | Wi-Fi 5 | Wi-Fi 7 |
| Bluetooth version | 5.0 | 5.4 |
| Ethernet | — | Yes |
| Firmware / software | ||
| Smart OS | Android TV | VIDAA |
| Netflix | Via dongle | Native |
| Casting | Chromecast built-in | AirPlay 2, Miracast |
| 3D | ||
| 3D support | — | Yes |
| 3D sync method | — | DLP-Link |
| 3D formats | — | Side-by-side, Top-bottom, Frame packing |
| Setup automation | ||
| Autofocus | None | — |
| Auto keystone | Yes | Yes |
| Screen fit / alignment | — | Yes |
| Obstacle avoidance | — | Yes |
| Eye-protection sensor | — | Yes |
| Integrated stand / gimbal | Type: adjustable_front_foot · Tilt deg: 12 | Horizontal deg: 360 · Vertical min deg: -40 · Vertical max deg: 220 |
| Acoustic noise | ||
| Fan noise (sound pressure) | Normal: 37 dB(A) · Quiet: 29 dB(A) | — |
| Environment & power | ||
| Operating temperature | 5–40°C | 5–35°C |
| Operating humidity | 20–80%RH | 20–80%RH |
| Altitude / high-altitude mode | 3,048 m | — |
| High-altitude mode | Yes | — |
| Operating orientations | Table, Rear, Tilt-limited | — |
| Rated voltage | 100–240 V | 100–240 V |
| Rated frequency | 50–60 Hz | 50–60 Hz |
| Power consumption (max) | 284 W | 360 W |
| Power consumption by mode | Normal: 284 W · Eco: 223 W | — |
| Standby power | 0.5 W | 0.5 W |
| Power supply | Internal | External brick |
| Physical & installation | ||
| Width | 320 mm | — |
| Depth | 211 mm | — |
| Height | 82 mm | 315 mm |
| Weight | 2.6 kg | 11.7 kg |
| Exhaust / intake direction | Rear | — |
| Colours / finishes | — | Gray |
| Mount hole pattern | — | Thread: 1/4"-20 · Effective thread length mm: 6.7–9 · Note: single threaded hole in the base of the gimbal |
| Safety & compliance | ||
| Photobiological risk group | — | RG2 |
| Laser product class | — | Class 1 |
| FDA variance | — | Laser Notice No. 57, dated May 8, 2019 |
| Safety & market certifications | FCC, UL | FCC |
| Support & ownership | ||
| Warranty | 🇺🇸 US 1 yr | 🇺🇸 US 1 yr · 🇨🇦 CA 1 yr |
| User manual | https://files.support.epson.com/docid/cpd6/cpd62252.pdf | — |
| In the box | ||
| Box contents | Projector, Power cord, Remote, Batteries, Quick start guide, Streaming dongle, Hdmi cable | Projector, Power cord, Power adapter, Batteries, Remote control, Quick start guide, Warranty card |
| Remote type | — | Voice |