BenQ TK705i vs Dangbei MP1 Max
Bold marks the better figure where both are stated to the same standard. “—” means the manufacturer doesn't state it.
 BenQ TK705iMSRP $1,799 |  Dangbei MP1 MaxMSRP $1,999 | |
|---|---|---|
| Display system | ||
| Imaging technology | DLP | DLP |
| Technology brand | — | DLP |
| Chip / panel diagonal | 0.47 in | 0.47 in |
| Native aspect ratio | 16:9 | — |
| Addressable resolution | 3840 × 2160 | 3840 × 2160 |
| Optics | ||
| Throw ratio | 1–1.3:1 | 1.2:1 |
| Projection distance table | 50″: 1.11–1.44 m · 60″: 1.33–1.73 m · 70″: 1.55–2.02 m · 80″: 1.77–2.3 m · 90″: 1.99–2.59 m · 100″: 2.21–2.88 m · 110″: 2.44–3.17 m · 120″: 2.66–3.45 m · 130″: 2.88–3.74 m · 140″: 3.1–4.03 m · 150″: 3.32–4.32 m · 160″: 3.54–4.61 m | — |
| Zoom type | Optical | Digital |
| Zoom ratio | 1.3× | — |
| Focus | Auto | Auto |
| Fixed offset | 100% | — |
| Focal length | 10.55–13.68 mm | — |
| F-number | 1.8–1.85 | — |
| Image size range | 60–150 in | 40–300 in |
| Vertical keystone | -30–30° | — |
| Horizontal keystone | -20–20° | — |
| Corner / warp correction | — | 4pt |
| Light source | ||
| Light source type | LED | Hybrid laser + LED |
| Light source detail | 4LED | Triple laser + LED |
| Light source life | Normal: 20,000 h · Eco: 30,000 h | — |
| Light-source dimming | Manual steps | — |
| Brightness | ||
| ISO light output | — | 3,100 lm |
| ANSI lumens | 3,000 lm | — |
| Contrast & black level | ||
| Dynamic contrast | 600,000:1 | — |
| Colour | ||
| Rec.709 gamut | 98% | — |
| BT.2020 gamut | — | 110% |
| Gamut metric | Coverage | — |
| Bit depth / 'number of colours' | 30 bit | — |
| Calibration & picture control | ||
| Greyscale control points | 11 | 11 |
| HDR | ||
| HDR formats | HDR10, HDR10+, HLG | HDR10, HDR10+, HLG |
| Motion & gaming | ||
| Frame interpolation (MEMC) | Yes | Yes |
| Max refresh rate | — | 1920×1080: 240 Hz |
| Input lag (rated) | 1920×1080 @ 60 Hz: 5 ms · 3840×2160 @ 60 Hz: 5 ms | — |
| Auto low-latency mode | Yes | — |
| Audio | ||
| Speaker power | — | 24 W |
| Speaker count | 2 | 2 |
| DTS | — | Yes |
| Audio outputs | 3.5 mm, HDMI eARC, Bluetooth | 3.5 mm, HDMI eARC, Bluetooth |
| HDMI eARC | Yes | Yes |
| Bluetooth speaker mode | Yes | Yes |
| Bluetooth audio out | Yes | Yes |
| Inputs, control & connectivity | ||
| Max input signal | 3840 × 2160 | — |
| HDMI port count | 2 | 2 |
| HDMI ports (feature-level) | HDMI 1: HDMI 2.1, HDCP 2.2; HDMI 2: HDMI 2.1, HDCP 2.2 | HDMI 1: HDMI 2.1; HDMI 2: HDMI 2.1, eARC |
| Horizontal scan frequency | 15–102 kHz | — |
| Vertical scan frequency | 23–60 Hz | — |
| USB-C video (DP Alt Mode) | Yes | — |
| USB media playback | Yes | Yes |
| 12 V trigger | Yes | — |
| Wi-Fi | Wi-Fi 6 | Wi-Fi 6 |
| Bluetooth version | 5.2 | 5.2 |
| Ethernet | — | No |
| Firmware / software | ||
| Smart OS | Google TV | Google TV |
| OS version | Android 11 | — |
| Netflix | Native | Native |
| Casting | Chromecast built-in | Chromecast built-in |
| RAM | — | 2 GB |
| Storage | — | 32 GB |
| SoC | — | Quad-core ARM Cortex-A55 |
| 3D | ||
| 3D support | — | Yes |
| 3D formats | — | Side-by-side, Top-bottom |
| Setup automation | ||
| Autofocus | When moved | — |
| Auto keystone | Yes | Yes |
| Screen fit / alignment | Yes | Yes |
| Obstacle avoidance | Yes | Yes |
| Eye-protection sensor | Yes | Yes |
| Integrated stand / gimbal | — | Type: built_in_stand · Horizontal rotation deg: 360 · Vertical tilt deg: 135 |
| Acoustic noise | ||
| Fan noise (sound pressure) | Typical: 26 dB(A) · Eco: 24 dB(A) | Standard: 24 dB(A) |
| Noise measurement distance | — | 1 m |
| Environment & power | ||
| Operating temperature | 0–40°C | 5–35°C |
| Operating humidity | 10–90%RH | — |
| Altitude / high-altitude mode | 2,000 m | — |
| High-altitude mode | Yes | — |
| Operating orientations | Table, Ceiling, Rear | Table, Ceiling |
| Rated voltage | 100–240 V | — |
| Rated frequency | 50–60 Hz | — |
| Power consumption (max) | 250 W | 190 W |
| Standby power | 0.5 W | 0.5 W |
| Networked standby power | 2 W | — |
| Power supply | External brick | External brick |
| USB-C PD output | 30 W | — |
| Physical & installation | ||
| Width | 229 mm | 296 mm |
| Depth | 250 mm | 230 mm |
| Height | 168 mm | 247 mm |
| Weight | 3.8 kg | 5.6 kg |
| Colours / finishes | — | Dark grey |
| Mount hole pattern | Thread: M4 · Screw length mm: 10 | Thread: 1/4-inch · Depth in: 0.26 · Holes: 1 |
| Tripod socket | Yes | — |
| Safety & compliance | ||
| Photobiological risk group | — | RG2 |
| Laser product class | — | Class 1 laser product (IEC 60825-1:2014) |
| Safety & market certifications | — | CE, UKCA, FCC |
| Support & ownership | ||
| Warranty | 🇺🇸 US 3 yr | 🇺🇸 US 1 yr |
| User manual | https://www.projectorcentral.com/pdf/projector_manual_12813.pdf | https://cdn.shopify.com/s/files/1/0582/1127/0815/files/MP1_Max-20250616.pdf?v=1750052373 |
| In the box | ||
| Box contents | Projector, Remote, Batteries, Power adapter, Power cord, Quick start guide, User documents | Remote, Batteries, Carrying case, Power plug, Manual |
| Remote type | Bluetooth | Bluetooth |