Optoma HZ41 vs XGIMI TITAN
Bold marks the better figure where both are stated to the same standard. “—” means the manufacturer doesn't state it.
| Optoma HZ41 |  XGIMI TITANMSRP $3,999 | |
|---|---|---|
| Display system | ||
| Imaging technology | DLP | DLP |
| Technology brand | DLP | DLP |
| Chip / panel diagonal | — | 0.78 in |
| Native aspect ratio | 16:9 | 16:9 |
| Native resolution | 1920 × 1080 | 1920 × 1080 |
| Pixel shift | — | Other |
| Addressable resolution | — | 3840 × 2160 |
| Colour wheel segments | — | 6 |
| Optics | ||
| Throw ratio | 1.48–1.62:1 | 1.2–1.8:1 |
| Projection distance table | 30″: 0.98–1.08 m · 100″: 3.27–3.58 m · 300″: 9.8–10.75 m | 250″: 6.7–9.4 m |
| Zoom type | Optical | Optical |
| Zoom ratio | 1.1× | 1.5× |
| Focus | Manual | Auto |
| Vertical lens shift | — | ±100% |
| Horizontal lens shift | — | ±40% |
| Motorized lens shift | — | Yes |
| Fixed offset | 116% | — |
| Focal length | 21.26–24 mm | — |
| F-number | 2.5–2.67 | — |
| Lens elements | — | 13 |
| Lens material | — | all-glass |
| Image size range | 30–300 in | 60–250 in |
| Vertical keystone | -30–30° | — |
| Horizontal keystone | -30–30° | — |
| Corner / warp correction | 4pt | — |
| Light source | ||
| Light source type | Laser (phosphor) | Laser (phosphor) |
| Light source detail | DuraCore laser | A red laser feeding the colour wheel directly, plus a blue laser split between the colour wheel and a phosphor wheel that adds green |
| Light source life | Eco: 30,000 h | Rated: 30,000 h |
| Life definition | — | Unspecified |
| Warm-up time | — | 12.8 sMeasured |
| Cool-down time | — | 7.4 sMeasured |
| Light-source dimming | Manual steps | Manual steps |
| Brightness | ||
| ISO light output | 4,600 lm | 5,000 lm |
| Brightness uniformity (centre-to-corner) | 75% | — |
| Contrast & black level | ||
| Dynamic contrast | 3,000,000:1 | 5,000,000:1 |
| Colour | ||
| DCI-P3 gamut | — | 150% |
| Gamut metric | — | Coverage |
| Gamut chromaticity space | — | Uv |
| Gamma / EOTF presets | 2.2, 2.4 | — |
| Bit depth / 'number of colours' | 10 bit | — |
| Filmmaker Mode | Yes | Yes |
| Calibration & picture control | ||
| Colour management system | 6-axis | — |
| ISF certified | Yes | — |
| HDR | ||
| HDR formats | HDR10, HLG | HDR10, HDR10+, HLG, Dolby Vision |
| Motion & gaming | ||
| Frame interpolation (MEMC) | — | Yes |
| Max refresh rate | 1920×1080: 120 Hz | 1920×1080: 240 Hz |
| Input lag (rated) | 3840×2160 @ 60 Hz: 17 ms · 1920×1080 @ 60 Hz: 17 ms · 1920×1080 @ 120 Hz: 8.6 ms | 1920×1080 @ 240 Hz: 15 ms |
| Auto low-latency mode | — | Yes |
| Audio | ||
| Speaker power | 15 W | 24 W |
| Speaker count | 1 | 2 |
| Audio channels | — | Stereo |
| Dolby Atmos | — | Yes |
| DTS | — | Yes |
| Audio outputs | 3.5 mm | 3.5 mm, Optical, HDMI eARC, Bluetooth |
| HDMI eARC | — | Yes |
| Bluetooth audio out | — | Yes |
| Inputs, control & connectivity | ||
| Max input signal | 3840 × 2160 | 3840 × 2160 |
| HDMI port count | 2 | 2 |
| HDMI ports (feature-level) | HDMI 1: HDMI 2.0; HDMI 2: HDMI 2.0 | HDMI 1: HDMI 2.0, eARC; HDMI 2: HDMI 2.0 |
| Audio input terminals | 3.5 mm | — |
| Horizontal scan frequency | 15–135 kHz | — |
| Vertical scan frequency | 24–120 Hz | — |
| HDBaseT | — | No |
| VGA input | Yes | No |
| RS-232 | Yes | Yes |
| LAN control | Yes | Yes |
| Wired IR input | — | Yes |
| 12 V trigger | Yes | — |
| PJLink class | Class 1 | — |
| Control ecosystem drivers | Crestron | — |
| Wi-Fi | — | Wi-Fi 6 |
| Bluetooth version | — | 5.2 |
| Ethernet | Yes | Yes |
| Firmware / software | ||
| Smart OS | — | None |
| Netflix | — | None |
| RAM | — | 4 GB |
| Storage | — | 128 GB |
| SoC | — | MT9681 |
| 3D | ||
| 3D support | Yes | Yes |
| 3D sync method | DLP-Link | — |
| 3D formats | Frame packing, Side-by-side, Top-bottom, Frame sequential | — |
| Setup automation | ||
| Auto keystone | — | Yes |
| Screen fit / alignment | — | Yes |
| Eye-protection sensor | — | Yes |
| Acoustic noise | ||
| Fan noise (sound pressure) | Eco: 29 dB(A) · Max: 31 dB(A) | Rated: 32 dB(A) |
| Noise measurement distance | — | 1 m |
| Environment & power | ||
| Operating temperature | 0–40°C | 0–40°C |
| Altitude / high-altitude mode | 2,500 m | — |
| High-altitude mode | Yes | — |
| Operating orientations | Table, Ceiling, Rear, 360° | Table, Ceiling, Rear |
| Rated voltage | 100–240 V | 100–240 V |
| Rated frequency | 50–60 Hz | 50–60 Hz |
| Power consumption (max) | 170 W | 500 W |
| Power consumption by mode | Minimum: 120 W · Maximum: 170 W | Performance: 477 WMeasured |
| Standby power | 0.5 W | — |
| Power supply | External brick | — |
| Physical & installation | ||
| Width | 274 mm | 441 mm |
| Depth | 216 mm | 345 mm |
| Height | 114 mm | 158 mm |
| Weight | 2.9 kg | 11.5 kg |
| Ingress protection | IP6X | — |
| Air filter | — | None |
| Safety & compliance | ||
| Photobiological risk group | RG2 | RG2 |
| Hazard distance | 1 m | — |
| Laser product class | Class 1 consumer laser product (Risk Group 2) | Class 1 |
| Safety & market certifications | FCC, CE | IMAX Enhanced |
| Support & ownership | ||
| Warranty | — | 🇺🇸 US 2 yr · 🇬🇧 GB 2 yr |
| User manual | https://region-resource.optoma.com/products/documents/tncPPIq985OQyQ4XlsG7kXnnInRyQmqgwsKYStyq.pdf | https://www.projectorcentral.com/pdf/projector_manual_12880.pdf |
| In the box | ||
| Box contents | Projector, Power cable, Remote, Batteries, Quick start guide | Remote, Batteries, Power cord, Lens cap, Wrench, Brackets, Feet screws, Documentation |
| Remote type | IR | Bluetooth |