Optoma HZ41 vs XGIMI TITAN Noir
Bold marks the better figure where both are stated to the same standard. “—” means the manufacturer doesn't state it.
| Optoma HZ41 |  XGIMI TITAN NoirMSRP $3,999 | |
|---|---|---|
| Display system | ||
| Imaging technology | DLP | DLP |
| Technology brand | DLP | DLP |
| Chip / panel model | — | 0.47'' DMD (SST) |
| Chip / panel diagonal | — | 0.47 in |
| Native aspect ratio | 16:9 | 16:9 |
| Native resolution | 1920 × 1080 | — |
| Addressable resolution | — | 3840 × 2160 |
| Optics | ||
| Throw ratio | 1.48–1.62:1 | 0.98–2:1 |
| Throw reference point | — | Lens |
| Projection distance table | 30″: 0.98–1.08 m · 100″: 3.27–3.58 m · 300″: 9.8–10.75 m | 80″: 1.74–3.54 m · 90″: 1.95–3.98 m · 100″: 2.17–4.43 m · 110″: 2.39–4.87 m · 120″: 2.6–5.31 m · 130″: 2.82–5.76 m · 140″: 3.04–6.2 m · 150″: 3.26–6.64 m · 200″: 4.34–8.86 m |
| Zoom type | Optical | Optical |
| Zoom ratio | 1.1× | 2.04× |
| Focus | Manual | Auto |
| Vertical lens shift | — | ±130% |
| Horizontal lens shift | — | ±50% |
| Fixed offset | 116% | — |
| Focal length | 21.26–24 mm | — |
| F-number | 2.5–2.67 | 2–7 |
| Lens elements | — | 15 |
| Image size range | 30–300 in | 40–300 in |
| Lens memory | — | 5 |
| Vertical keystone | -30–30° | — |
| Horizontal keystone | -30–30° | — |
| Corner / warp correction | 4pt | 4pt |
| Light source | ||
| Light source type | Laser (phosphor) | RGB triple laser |
| Light source detail | DuraCore laser | RGB triple laser, 30 laser chips |
| Light source life | Eco: 30,000 h | — |
| Light-source dimming | Manual steps | — |
| Brightness | ||
| ISO light output | 4,600 lm | 4,800 lm |
| Brightness uniformity (centre-to-corner) | 75% | — |
| Contrast & black level | ||
| Native on/off contrast | — | 7,000:1 |
| Dynamic contrast | 3,000,000:1 | 100,000:1 |
| Dynamic light control | — | Dynamic iris |
| Manual iris / aperture | — | Yes |
| Colour | ||
| BT.2020 gamut | — | 110% |
| Gamut metric | — | Area |
| Colour temperature presets | — | D65, Custom |
| Gamma / EOTF presets | 2.2, 2.4 | 2.2, Custom |
| Bit depth / 'number of colours' | 10 bit | — |
| Filmmaker Mode | Yes | Yes |
| Calibration & picture control | ||
| Colour management system | 6-axis | — |
| Greyscale control points | — | 11 |
| ISF certified | Yes | — |
| HDR | ||
| HDR formats | HDR10, HLG | HDR10, HDR10+, Dolby Vision |
| Tone mapping type | — | Dynamic |
| Tone-mapping brand name | — | HDR dynamic brightness mapping |
| Motion & gaming | ||
| Frame interpolation (MEMC) | — | Yes |
| Max refresh rate | 1920×1080: 120 Hz | 1920×1080: 240 Hz |
| Input lag (rated) | 3840×2160 @ 60 Hz: 17 ms · 1920×1080 @ 60 Hz: 17 ms · 1920×1080 @ 120 Hz: 8.6 ms | 1920×1080 @ 240 Hz: 1 ms · 1920×1080 @ 120 Hz: 2.2 ms · 3840×2160 @ 60 Hz: 3 ms |
| Variable refresh rate | — | HDMI VRR, FreeSync |
| Auto low-latency mode | — | Yes |
| Audio | ||
| Speaker power | 15 W | 24 W |
| Speaker count | 1 | 2 |
| Audio partner | — | Harman Kardon |
| DTS | — | Yes |
| Audio outputs | 3.5 mm | Optical, 3.5 mm, HDMI eARC, Bluetooth |
| HDMI ARC | — | Yes |
| HDMI eARC | — | Yes |
| Bluetooth audio out | — | Yes |
| Inputs, control & connectivity | ||
| Max input signal | 3840 × 2160 | — |
| HDMI port count | 2 | 3 |
| HDMI ports (feature-level) | HDMI 1: HDMI 2.0; HDMI 2: HDMI 2.0 | HDMI1: HDMI, eARC; HDMI2: HDMI; HDMI3: HDMI |
| Audio input terminals | 3.5 mm | — |
| Horizontal scan frequency | 15–135 kHz | — |
| Vertical scan frequency | 24–120 Hz | — |
| VGA input | Yes | — |
| USB media playback | — | Yes |
| RS-232 | Yes | Yes |
| LAN control | Yes | — |
| 12 V trigger | Yes | — |
| PJLink class | Class 1 | — |
| Control ecosystem drivers | Crestron | — |
| Wi-Fi | — | Wi-Fi 6 |
| Bluetooth version | — | 5.2 |
| Ethernet | Yes | Yes |
| Firmware / software | ||
| RAM | — | 4 GB |
| Storage | — | 64 GB |
| SoC | — | MT9681 |
| 3D | ||
| 3D support | Yes | Yes |
| 3D sync method | DLP-Link | — |
| 3D formats | Frame packing, Side-by-side, Top-bottom, Frame sequential | Side-by-side, Top-bottom, Frame packing |
| Setup automation | ||
| Autofocus | — | When moved |
| Auto keystone | — | Yes |
| Screen fit / alignment | — | Yes |
| Obstacle avoidance | — | Yes |
| Eye-protection sensor | — | Yes |
| Acoustic noise | ||
| Fan noise (sound pressure) | Eco: 29 dB(A) · Max: 31 dB(A) | Rated: 28 dB(A) |
| Noise measurement standard | — | Unspecified |
| Noise measurement distance | — | 1 m |
| Environment & power | ||
| Operating temperature | 0–40°C | 0–40°C |
| Altitude / high-altitude mode | 2,500 m | — |
| High-altitude mode | Yes | Yes |
| Operating orientations | Table, Ceiling, Rear, 360° | Table, Ceiling, Rear |
| Rated voltage | 100–240 V | 100–240 V |
| Rated frequency | 50–60 Hz | 50–60 Hz |
| Power consumption (max) | 170 W | 300 W |
| Power consumption by mode | Minimum: 120 W · Maximum: 170 W | — |
| Standby power | 0.5 W | — |
| Power supply | External brick | External brick |
| Physical & installation | ||
| Width | 274 mm | 334 mm |
| Depth | 216 mm | 248 mm |
| Height | 114 mm | 178 mm |
| Weight | 2.9 kg | 7.5 kg |
| Ingress protection | IP6X | — |
| Safety & compliance | ||
| Photobiological risk group | RG2 | — |
| Hazard distance | 1 m | — |
| Laser product class | Class 1 consumer laser product (Risk Group 2) | — |
| Safety & market certifications | FCC, CE | IMAX Enhanced |
| Support & ownership | ||
| Warranty | — | 🇺🇸 US 2 yr · 🇬🇧 GB 2 yr · 🇪🇺 EU 2 yr |
| User manual | https://region-resource.optoma.com/products/documents/tncPPIq985OQyQ4XlsG7kXnnInRyQmqgwsKYStyq.pdf | https://www.projectorcentral.com/pdf/projector_manual_12925.pdf |
| In the box | ||
| Box contents | Projector, Power cable, Remote, Batteries, Quick start guide | Power cord, Power adapter, User manual, Warranty card, Remote, Batteries |
| Remote type | IR | Bluetooth |