Hisense M2 Pro vs Optoma PK32
Bold marks the better figure where both are stated to the same standard. “—” means the manufacturer doesn't state it.
 Hisense M2 ProMSRP $1,299.99 | Optoma PK32 MSRP $1,299 | |
|---|---|---|
| Display system | ||
| Imaging technology | DLP | DLP |
| Technology brand | DLP | DLP |
| Number of imaging devices | — | 1 |
| Chip / panel diagonal | 0.47 in | 0.47 in |
| Native aspect ratio | 16:9 | 16:9 |
| Native resolution | 1920 × 1080 | 1920 × 1080 |
| Pixel shift | — | Other |
| Addressable resolution | 3840 × 2160 | 3840 × 2160 |
| Optics | ||
| Throw ratio | 1–1.3:1 | 1.13–1.46:1 |
| Projection distance table | — | 60″: 1.5–1.94 m · 70″: 1.75–2.26 m · 80″: 2–2.59 m · 90″: 2.25–2.91 m · 100″: 2.5–3.23 m · 110″: 2.74–3.56 m · 120″: 2.99–3.88 m · 130″: 3.24–4.2 m · 140″: 3.49–4.53 m · 150″: 3.74–4.85 m |
| Zoom type | Optical | Optical |
| Zoom ratio | 1.3× | 1.3× |
| Focus | Auto | Auto |
| Vertical lens shift | 0% | 0% |
| Horizontal lens shift | 0% | 0% |
| Fixed offset | — | 105% |
| Focal length | — | 11.9–15.5 mm |
| F-number | — | 1.94–2.12 |
| Interchangeable lens | No | No |
| Image size range | 65–200 in | 60–150 in |
| Vertical keystone | — | -40–40° |
| Horizontal keystone | — | -40–40° |
| Corner / warp correction | — | Warp |
| Light source | ||
| Light source type | RGB triple laser | LED |
| Light source detail | R+G+B triple laser with 28 laser chips | 4LED RGBA |
| Light source life | Rated: 25,000 h | Eco: 30,000 h |
| Light-source dimming | — | Manual steps |
| Brightness | ||
| ISO light output | — | 1,100 lm |
| ANSI lumens | 1,300 lm | — |
| Claimed brightness (non-standard) | — | 2,000 |
| Claimed brightness unit | — | Unspecified |
| Brightness uniformity (centre-to-corner) | — | 90% |
| Contrast & black level | ||
| Native on/off contrast | 1,000:1 | — |
| Dynamic contrast | — | 250,000:1 |
| Dynamic light control | Laser dimming | — |
| Colour | ||
| DCI-P3 gamut | — | 95% |
| BT.2020 gamut | 110% | — |
| Gamut metric | — | Coverage |
| Gamma / EOTF presets | — | 2.2, 2.4 |
| Bit depth / 'number of colours' | — | 30 bit |
| Filmmaker Mode | Yes | — |
| Calibration & picture control | ||
| Colour management system | — | 6-axis |
| ISF certified | — | Yes |
| HDR | ||
| HDR formats | HDR10, HDR10+, HLG, Dolby Vision | HDR10, HLG |
| Tone mapping type | — | Static |
| Motion & gaming | ||
| Frame interpolation (MEMC) | Yes | — |
| Max refresh rate | 3840×2160: 60 Hz · 1920×1080: 240 Hz | 3840×2160: 60 Hz · 1920×1080: 240 Hz |
| Input lag (rated) | — | 3840×2160 @ 60 Hz: 16 ms · 1920×1080 @ 60 Hz: 16 ms · 1920×1080 @ 120 Hz: 8 ms · 1920×1080 @ 240 Hz: 4.6 ms |
| Auto low-latency mode | Yes | — |
| Audio | ||
| Speaker power | 20 W | 10 W |
| Speaker count | 2 | 2 |
| Audio channels | Stereo | Stereo |
| DTS | Yes | — |
| Audio outputs | HDMI eARC, Bluetooth | 3.5 mm, HDMI eARC |
| HDMI ARC | Yes | — |
| HDMI eARC | Yes | Yes |
| Bluetooth audio out | Yes | No |
| Inputs, control & connectivity | ||
| Max input signal | 3840 × 2160 | 3840 × 2160 |
| HDMI port count | 1 | 2 |
| HDMI ports (feature-level) | HDMI 1: HDMI 2.1, eARC (ALLM) | HDMI (eARC): HDMI 2.0, eARC; HDMI: HDMI 2.0 |
| Horizontal scan frequency | — | 15–255 kHz |
| Vertical scan frequency | — | 23–240 Hz |
| USB-C video (DP Alt Mode) | — | Yes |
| USB media playback | Yes | — |
| Control ecosystem drivers | Control4 | — |
| Wi-Fi | — | None |
| Bluetooth version | 5.0 | none |
| Ethernet | No | — |
| Firmware / software | ||
| Smart OS | VIDAA | None |
| OS version | U9 | — |
| Netflix | Native | — |
| Casting | AirPlay 2, Miracast | — |
| 3D | ||
| 3D support | Yes | Yes |
| 3D sync method | — | DLP-Link |
| 3D formats | — | Frame sequential |
| Glasses included | — | 0 |
| Setup automation | ||
| Auto keystone | Yes | Yes |
| Screen fit / alignment | Yes | — |
| Obstacle avoidance | Yes | Yes |
| Eye-protection sensor | Yes | — |
| Integrated stand / gimbal | Type: gimbal · Tilt deg vertical: 360 | — |
| Acoustic noise | ||
| Fan noise (sound pressure) | — | Eco: 27 dB(A) · Bright: 33 dB(A) |
| Environment & power | ||
| Operating temperature | — | 0–40°C |
| Altitude / high-altitude mode | — | 3,048 m |
| High-altitude mode | — | Yes |
| Operating orientations | — | Table, Ceiling, Rear |
| Rated voltage | 100–120 V | 100–240 V |
| Rated frequency | 50–60 Hz | 50–60 Hz |
| Power consumption (max) | 100 W | 162 W |
| Power consumption by mode | — | Typical eco: 70 W · Max eco: 103 W · Typical bright: 130 W · Max bright: 162 W |
| Standby power | 0.5 W | 0.5 W |
| Power supply | — | External brick |
| Physical & installation | ||
| Width | 193 mm | 238 mm |
| Depth | 218 mm | 215 mm |
| Height | 230 mm | 130 mm |
| Weight | 3.9 kg | 2.7 kg |
| Colours / finishes | Gray | — |
| Mount hole pattern | — | Thread: M4 |
| Tripod socket | Yes | Yes |
| Safety & compliance | ||
| Photobiological risk group | — | RG2 |
| Safety & market certifications | — | FCC, CE |
| Support & ownership | ||
| Warranty | 🇨🇦 CA 1 yr | 🇺🇸 US 1 yr |
| User manual | — | https://region-resource.optoma.com/products/documents/hYInF2nOz6KeeM8kK3Z1waxNjlBqjY6Gagtu4t1L.pdf |
| In the box | ||
| Box contents | Projector, Power cord, Remote, Quick start guide, Carrying case | Power adapter, Remote, Batteries, Manual, Quick start guide |
| Remote type | Voice | IR |