Epson EpiqVision Ultra LS800 vs Hisense L9Q
Bold marks the better figure where both are stated to the same standard. βββ means the manufacturer doesn't state it.
 Epson EpiqVision Ultra LS800MSRP $3,499 |  Hisense L9QMSRP $5,999.99 | |
|---|---|---|
| Display system | ||
| Imaging technology | 3LCD | DLP |
| Technology brand | 3LCD | β |
| Number of imaging devices | 3 | 1 |
| Chip / panel diagonal | 0.62 in | 0.47 in |
| Native aspect ratio | 16:9 | 16:9 |
| Native resolution | 1920 Γ 1080 | 1920 Γ 1080 |
| Pixel shift | 4K PRO-UHD | Other |
| Addressable resolution | 3840 Γ 2160 | 3840 Γ 2160 |
| Optical system description | 3LCD, Poly-silicon TFT active matrix | β |
| Optics | ||
| Throw ratio | 0.16β0.4:1 | 0.18:1 |
| Throw reference point | Rear | Rear |
| Projection distance table | 80β³: 0.02 m Β· 90β³: 0.06 m Β· 100β³: 0.1 m Β· 110β³: 0.14 m Β· 120β³: 0.17 m Β· 130β³: 0.21 m Β· 150β³: 0.29 m | 80β³: 0.06 m Β· 100β³: 0.14 m Β· 110β³: 0.18 m Β· 120β³: 0.22 m Β· 139β³: 0.29 m Β· 150β³: 0.34 m Β· 200β³: 0.54 m |
| Zoom type | Digital | None |
| Zoom ratio | 2.5Γ | 1Γ |
| Focus | Manual | Motorized |
| Vertical lens shift | β | 0% |
| Horizontal lens shift | β | 0% |
| Focal length | 2.3 mm | β |
| F-number | 1.8 | β |
| Interchangeable lens | β | No |
| Image size range | 80β150 in | 80β200 in |
| Corner / warp correction | β | 8pt |
| Light source | ||
| Light source type | Laser (phosphor) | RGB triple laser |
| Light source detail | Laser diode, blue 449 to 461 nm, light source output power up to 88 W, with phosphor | R+G+B triple laser (LPU Digital Laser Engine 2.0, TriChroma) |
| Light source life | Normal: 20,000 h Β· Medium: 20,000 h Β· Eco: 20,000 h | Rated: 25,000 h |
| Brightness | ||
| ISO light output | 4,000 lm | β |
| ANSI lumens | β | 5,000 lm |
| Colour light output (CLO) | 4,000 lm (colour) | β |
| Brightness by mode | Normal: 4,000 lm Β· Medium: 3,000 lm Β· Eco: 2,000 lm | β |
| Contrast & black level | ||
| Native on/off contrast | 1,800:1 | 5,000:1 |
| Dynamic contrast | 2,500,000:1 | β |
| Colour | ||
| BT.2020 gamut | β | 110% |
| Gamut metric | β | Area |
| Bit depth / 'number of colours' | 10 bit | 10 bit |
| Filmmaker Mode | β | Yes |
| Calibration & picture control | ||
| Colour management system | None | 6-axis |
| Greyscale control points | β | 20 |
| HDR | ||
| HDR formats | HDR10, HLG | HDR10, HDR10+, HLG, Dolby Vision |
| Tone mapping type | Adjustable | Dynamic |
| Max HDR input | 4K 60 fps HDR10/HLG at 4:2:2 | β |
| Motion & gaming | ||
| Frame interpolation (MEMC) | Yes | Yes |
| Max refresh rate | 3840Γ2160: 60 Hz Β· 1920Γ1080: 120 Hz | 1920Γ1080: 240 Hz |
| Auto low-latency mode | β | Yes |
| Audio | ||
| Speaker power | 20 W | 116 W |
| Speaker count | 3 | 10 |
| Audio channels | 2.1 | Other |
| Audio partner | Yamaha | Devialet |
| Dolby Atmos | No | Yes |
| DTS | Yes | Yes |
| Audio outputs | HDMI ARC, Optical, 3.5 mm | Optical, HDMI eARC |
| HDMI ARC | Yes | Yes |
| HDMI eARC | No | Yes |
| Bluetooth speaker mode | Yes | β |
| Bluetooth audio out | Yes | β |
| Inputs, control & connectivity | ||
| Max input signal | 4096 Γ 2160 | 3840 Γ 2160 |
| HDMI port count | 3 | 4 |
| HDMI ports (feature-level) | HDMI1: HDMI 2.0, 18 Gbps, HDCP 2.3; HDMI2 (ARC): HDMI 2.0, 18 Gbps, HDCP 2.3, ARC; HDMI3 (Game): HDMI 2.0, 18 Gbps, HDCP 2.3 (1080P UP TO 120 HZ, LOW-LATENCY GAME PORT) | HDMI 2.1 (1 of 2): HDMI 2.1, 48 Gbps, HDCP 2.3 (ALLM); HDMI 2.1 (2 of 2): HDMI 2.1, 48 Gbps, HDCP 2.3 (ALLM); HDMI 3: HDMI 2.0, HDCP 2.2, eARC; HDMI 2.0 (other): HDMI 2.0, HDCP 2.2 |
| USB media playback | Yes | Yes |
| LAN control | No | β |
| Control ecosystem drivers | β | Control4, Urc, Alexa |
| Wi-Fi | Wi-Fi 5 | Wi-Fi 6E |
| Bluetooth version | 5.0 | 5.3 |
| Ethernet | No | Yes |
| Firmware / software | ||
| Smart OS | Android TV | Google TV |
| OS version | Android TV 11 | β |
| Certified OS | β | Yes |
| Netflix | None | Native |
| Casting | Chromecast built-in | Chromecast built-in, AirPlay 2 |
| Update policy | Firmware updates over the network, with an on-screen notification when a new version is available | β |
| 3D | ||
| 3D support | No | Yes |
| 3D sync method | β | DLP-Link |
| 3D formats | β | Side-by-side, Top-bottom, Frame packing |
| Glasses included | β | 0 |
| Setup automation | ||
| Auto keystone | β | Yes |
| Screen fit / alignment | β | Yes |
| Obstacle avoidance | Yes | β |
| Eye-protection sensor | Yes | Yes |
| Acoustic noise | ||
| Fan noise (sound pressure) | Normal: 32 dB(A) Β· Medium: 27 dB(A) Β· Eco: 19 dB(A) | β |
| Environment & power | ||
| Operating temperature | 0β40Β°C | 5β35Β°C |
| Operating humidity | 20β80%RH | 20β80%RH |
| Altitude / high-altitude mode | 3,048 m | β |
| High-altitude mode | Yes | β |
| Operating orientations | Table, Ceiling, Rear | Table, Ceiling, Rear |
| Rated voltage | 100β240 V | 120 V |
| Rated frequency | 50β60 Hz | 60 Hz |
| Power consumption (max) | 350 W | 350 W |
| Power consumption by mode | Normal: 350 W Β· Medium: 271 W Β· Eco: 217 W | β |
| Standby power | 0.4 W | 0.5 W |
| Networked standby power | 2 W | β |
| Physical & installation | ||
| Width | 695 mm | 624 mm |
| Depth | 341 mm | 317 mm |
| Height | 156 mm | 166 mm |
| Weight | 12.3 kg | 12.9 kg |
| Colours / finishes | Black, White | Black and coffee |
| Mount hole pattern | Thread: M4 Β· Screw length mm: 0β9 | β |
| Sealed optical engine | Yes | β |
| Air filter | Replaceable | β |
| Safety & compliance | ||
| Photobiological risk group | RG2 | RG2 |
| Laser product class | Class 1 | Class 1 laser product (IEC 60825-1:2014) |
| Safety & market certifications | FCC, UL | FCC, IMAX Enhanced |
| Support & ownership | ||
| Warranty | πΊπΈ US 2 yr Β· πͺπΊ EU 5 yr | πΊπΈ US 2 yr Β· π¨π¦ CA 1 yr |
| User manual | https://files.support.epson.com/docid/cpd6/cpd62535.pdf | β |
| In the box | ||
| Box contents | Projector, Power cord, Remote, Batteries, Quick setup guide | Projector, Remote, Batteries, Power cord, Cleaning kit, Gloves, C shaped blocks, Quick start guide, Warranty card |
| Remote type | Voice | Voice |
| 3D glasses in box | β | 0 |