Optoma HZ41 vs XGIMI HORIZON 20 Pro
Bold marks the better figure where both are stated to the same standard. βββ means the manufacturer doesn't state it.
| Optoma HZ41 |  XGIMI HORIZON 20 ProMSRP $2,499 | |
|---|---|---|
| Display system | ||
| Imaging technology | DLP | DLP |
| Technology brand | DLP | DLP |
| Chip / panel diagonal | β | 0.47 in |
| Native aspect ratio | 16:9 | 16:9 |
| Native resolution | 1920 Γ 1080 | β |
| Addressable resolution | β | 3840 Γ 2160 |
| Optics | ||
| Throw ratio | 1.48β1.62:1 | 1.2β1.5:1 |
| Projection distance table | 30β³: 0.98β1.08 m Β· 100β³: 3.27β3.58 m Β· 300β³: 9.8β10.75 m | β |
| Zoom type | Optical | Optical |
| Zoom ratio | 1.1Γ | 1.25Γ |
| Focus | Manual | Auto |
| Vertical lens shift | β | Β±120% |
| Horizontal lens shift | β | Β±45% |
| Motorized lens shift | β | Yes |
| Fixed offset | 116% | β |
| Focal length | 21.26β24 mm | β |
| F-number | 2.5β2.67 | β |
| Image size range | 30β300 in | 40β300 in |
| Vertical keystone | -30β30Β° | β |
| Horizontal keystone | -30β30Β° | β |
| Corner / warp correction | 4pt | β |
| Light source | ||
| Light source type | Laser (phosphor) | RGB triple laser |
| Light source detail | DuraCore laser | XGIMI X-Master RGB triple laser engine |
| Light source life | Eco: 30,000 h | β |
| Light-source dimming | Manual steps | β |
| Brightness | ||
| ISO light output | 4,600 lm | 4,100 lm |
| Brightness uniformity (centre-to-corner) | 75% | β |
| Contrast & black level | ||
| Dynamic contrast | 3,000,000:1 | 20,000:1 |
| Colour | ||
| BT.2020 gamut | β | 110% |
| Gamut metric | β | Area |
| Gamma / EOTF presets | 2.2, 2.4 | β |
| Bit depth / 'number of colours' | 10 bit | β |
| Filmmaker Mode | Yes | Yes |
| Calibration & picture control | ||
| Colour management system | 6-axis | β |
| ISF certified | Yes | β |
| HDR | ||
| HDR formats | HDR10, HLG | HDR10+, Dolby Vision |
| Tone mapping type | β | Dynamic |
| Tone-mapping brand name | β | Dynamic Tone Mapping |
| Motion & gaming | ||
| Frame interpolation (MEMC) | β | Yes |
| Max refresh rate | 1920Γ1080: 120 Hz | 1920Γ1080: 240 Hz Β· 3840Γ2160: 60 Hz |
| Input lag (rated) | 3840Γ2160 @ 60 Hz: 17 ms Β· 1920Γ1080 @ 60 Hz: 17 ms Β· 1920Γ1080 @ 120 Hz: 8.6 ms | 1920Γ1080 @ 240 Hz: 1 ms Β· 1920Γ1080 @ 120 Hz: 2.2 ms Β· 3840Γ2160 @ 60 Hz: 3 ms |
| Auto low-latency mode | β | Yes |
| Audio | ||
| Speaker power | 15 W | 24 W |
| Speaker count | 1 | 2 |
| Audio partner | β | Harman Kardon |
| DTS | β | Yes |
| Audio outputs | 3.5 mm | 3.5 mm, Optical, HDMI eARC |
| HDMI eARC | β | Yes |
| Inputs, control & connectivity | ||
| Max input signal | 3840 Γ 2160 | 3840 Γ 2160 |
| HDMI port count | 2 | 2 |
| HDMI ports (feature-level) | HDMI 1: HDMI 2.0; HDMI 2: HDMI 2.0 | HDMI 1: HDMI, eARC; HDMI 2: HDMI |
| Audio input terminals | 3.5 mm | 3.5 mm, Optical |
| Horizontal scan frequency | 15β135 kHz | β |
| Vertical scan frequency | 24β120 Hz | β |
| VGA input | Yes | β |
| RS-232 | Yes | β |
| LAN control | Yes | β |
| 12 V trigger | Yes | β |
| PJLink class | Class 1 | β |
| Control ecosystem drivers | Crestron | Google Home |
| Wi-Fi | β | Wi-Fi 6 |
| Bluetooth version | β | 5.2 |
| Ethernet | Yes | β |
| Firmware / software | ||
| Smart OS | β | Google TV |
| Netflix | β | Native |
| Casting | β | Chromecast built-in, DLNA |
| RAM | β | 4 GB |
| SoC | β | MT9679 |
| Update policy | β | Up to four years of over-the-air software maintenance from the product's mass production date |
| 3D | ||
| 3D support | Yes | Yes |
| 3D sync method | DLP-Link | β |
| 3D formats | Frame packing, Side-by-side, Top-bottom, Frame sequential | β |
| Setup automation | ||
| Auto keystone | β | Yes |
| Screen fit / alignment | β | Yes |
| Obstacle avoidance | β | Yes |
| Eye-protection sensor | β | Yes |
| Integrated stand / gimbal | β | Type: gimbal |
| Acoustic noise | ||
| Fan noise (sound pressure) | Eco: 29 dB(A) Β· Max: 31 dB(A) | Rated: 28 dB(A) |
| Noise measurement distance | β | 1 m |
| Environment & power | ||
| Operating temperature | 0β40Β°C | 0β40Β°C |
| Altitude / high-altitude mode | 2,500 m | β |
| High-altitude mode | Yes | β |
| Operating orientations | Table, Ceiling, Rear, 360Β° | Table, Ceiling, Rear |
| Rated voltage | 100β240 V | 100β240 V |
| Rated frequency | 50β60 Hz | 50β60 Hz |
| Power consumption (max) | 170 W | 230 W |
| Power consumption by mode | Minimum: 120 W Β· Maximum: 170 W | β |
| Standby power | 0.5 W | β |
| Power supply | External brick | External brick |
| Physical & installation | ||
| Width | 274 mm | 298 mm |
| Depth | 216 mm | 190 mm |
| Height | 114 mm | 249 mm |
| Weight | 2.9 kg | 4.9 kg |
| Ingress protection | IP6X | β |
| Colours / finishes | β | Elephant grey |
| Tripod socket | β | Yes |
| Safety & compliance | ||
| Photobiological risk group | RG2 | RG2 |
| Hazard distance | 1 m | β |
| Laser product class | Class 1 consumer laser product (Risk Group 2) | β |
| Safety & market certifications | FCC, CE | IMAX Enhanced |
| Support & ownership | ||
| Warranty | β | πΊπΈ US 2 yr |
| User manual | https://region-resource.optoma.com/products/documents/tncPPIq985OQyQ4XlsG7kXnnInRyQmqgwsKYStyq.pdf | https://helpcenter.xgimi.com/hc/en-gb/article_attachments/50404758879257 |
| In the box | ||
| Box contents | Projector, Power cable, Remote, Batteries, Quick start guide | Power plug, User manual, Warranty card, Remote control, Batteries |
| Remote type | IR | Bluetooth |