XGIMI AURA 2
MSRP$2,699
| Brand | XGIMI · AURA |
| Type | UST laser TV |
| HDR formats | HDR10, HLG, Dolby Vision |
| Imaging technology | DLP |
| Light source | Dual Light 2.0 |
| ISO light output | 2,300 lm |
| Throw ratio | 0.18:1 |
A 4K ultra-short-throw laser projector from XGIMI with a 0.177:1 throw ratio, rated 2,300 ISO lumens. It runs Android TV 11.0, has four 15 W Harman Kardon speakers and supports Dolby Vision and IMAX Enhanced. The US store listing showed it as unavailable when read.
Data sheet
Picture
| Imaging technology | DLP | |
| Chip / panel diagonal | 0.47 in | |
| Dynamic contrast | 1,000,000:1 | |
| DCI-P3 gamut | 99% | |
| HDR formats | HDR10, HLG, Dolby Vision | |
| Frame interpolation (MEMC) | Yes | |
| 3D support | Yes | |
| 3D formats | Frame packing, Side-by-side |
Optics
| Throw ratio | 0.18:1 | |
| Projection distance table | 100″: 0.18 m | |
| Image size range | 90–150 in |
Light source
| Light source detail | Dual Light 2.0 | |
| Light source life | Rated: 20,000 h | |
| Life definition | Theoretical | |
| ISO light output | 2,300 lm Footnote 5: nominal value measured under ISO 21118 in Performance/High Power mode. | Footnote 5: nominal value measured under ISO 21118 in Performance/High Power mode. |
Audio
| Speaker power | 60 W | |
| Speaker count | 4 | |
| Audio channels | Stereo | |
| Audio partner | Harman/Kardon | |
| Dolby Atmos | Yes | |
| HDMI eARC | Yes |
Inputs, control & connectivity
| HDMI port count | 3 | |
| Wi-Fi | Wi-Fi 6 | |
| Bluetooth version | 5.2 |
Firmware / software
| Smart OS | Android TV | |
| OS version | 11.0 | |
| RAM | 2 GB | |
| Storage | 32 GB |
Environment & power
| Operating temperature | 0–40°C | |
| Rated voltage | 100–240 V | |
| Rated frequency | 50–60 Hz | |
| Power consumption (max) | 180 W | |
| Fan noise (sound pressure) | Rated: 32 dB(A) 25°C | 25°C |
| Noise measurement distance | 1 m |
Support & ownership
| Warranty | 🇺🇸 US 2 yr |
Tools
- Throw calculator — How far from the screen the AURA 2 needs to sit for a given image size, set to its 0.177:1 lens.
- Download spec as CSV — Every value on this data sheet with its unit and source, one row per spec.
- Download spec as JSON — The same data from the open data API, with variants and identifiers.
Variants & identifiers
Use these to confirm a listing is this exact model. Any of them works at /p/{code}.
| Variant | Region | Type | Code |
|---|---|---|---|
| Standard, US | 🇺🇸 US | MPN | WM03B |
Compare with
Same category, nearest on standardised brightness.
Sources
- XGIMI US: AURA 2 product page Manufacturer spec page
Editor's notes. Brightness: XGIMI says "2300 ISO Lumens" (ISO 21118, Performance/High Power mode, footnote describes it as an average of mass-produced units). A retailer quoting "2200 ANSI" was ignored (not primary). Contrast is a lab-test dynamic figure per footnote 6; DCI-P3 coverage varies by unit (footnote 7).
Regional differences: the US store page shows $2,699 and "unavailable"; the global store page showed $2,239 (down from $2,699). The global page lists regional plug types and says specs may vary by country. Both pages list model WM03B and Android TV 11.0; the global store also has an "AURA 2 (New)" listing with Google TV that was not read.
Identifier: WM03B is labelled "Model number" on the XGIMI page and is recorded as the mpn; no UPC found. The $2,699 is the price printed on the US page, not a labelled MSRP.
Not recorded: native resolution (page says 3840 x 2160 with a 0.47 inch DMD, which does not state whether it is native or pixel-shifted), input lag (page says "Down to 20ms (AK off)" with no resolution), launch date, throw distance table (single data point only), throw distance reference point.
Quotes were taken from page text via a summarising fetch tool; spot-check wording on the live page.
Spotted an error? Every value is checked against the source above it. How we build data sheets.